All-in-One Grip Controller for Switch 2

Key Features

1. Bluetooth Connection & Wake-Up Function
   This controller is specially designed for Switch 2 with stable Bluetooth connection.

• First-time pairing: Press and hold the HOME button for about 3 seconds until the blue LED flashes rapidly.

• Reconnection: Short-press the HOME button for 1 second when the console is on.

• Wake-up function activation:

  1. Keep the original Jo**Con attached to the console.

  2. Pair the JC500 with the console.

  3. Within 20 seconds of successful connection, remove and reattach either Jo**Con.
     Once activated, short-press the HOME button to wake up the console.

1. Dual-Motor Vibration

   4 adjustable levels: Off, Low, Medium, High. Short-press the vibration button to cycle through modes.
2. Gyro Motion Control

   Built-in 6-axis gyro for accurate motion control in supported games.
3. Independent Capture Button

   One-click screenshot; long press for screen recording.
4. TMR Sticks Joysticks

   Upgraded TMR sensor delivers far higher precision than ordinary hall effect joysticks. No drift for longer lifespan, no wear, zero dead zone, with smooth and instant response.
5. Turbo Function

   Supports manual and auto turbo with 3 adjustable speeds:

   4 hits/sec, 8 hits/sec, 16 hits/sec.

• Increase speed: Turbo + ↑

• Decrease speed: T + ↓

• Clear all turbo settings: Long press the T button for 5 seconds.
  Compatible with: A/B/X/Y/LB/ZL/RB/ZR.

1. Long-Lasting Battery

• 1000mAh battery

• Up to 10 hours of gameplay

• Type‑C charging, fully charged in about 3 hours

• Charging indicators:

  • Power on: Right blue LED flashes slowly; stays on when full.

  • Power off: Right blue LED flashes slowly; turns off when full.

1. Programmable Back Buttons (M1/M2)
   Each back button supports up to 21 programmable keys, including:
   A/B/X/Y/LB/ZL/RB/ZR/L3/R3/‑/+/D‑pad.

• Enter programming: Press M + M1/M2 for 2 seconds until the joystick light flashes white. Press the desired buttons, then confirm with M1/M2.

• Clear all macros: Long press M for 5 seconds (red flash 3 times).

• Clear single macro: Double-click the corresponding back button in programming mode.

1. RGB Joystick Lights
   Multiple lighting modes:
   Fast RGB → RGB Fade → Slow RGB → Single Color Fade → Cyan&Orange → Pink → Cyan → Green → Blue → Purple → Orange.
   5 brightness levels (10%–100%):

• Brighter: ↑ + RGB

• Dimmer: ↓ + RGB

1. 6 Game Card Slots

   Built-in slots on the back hold 6 game cards securely.
2. Secure Lock Design

   Elastic locks on both bottom sides automatically grip the console to prevent slipping.
3. Adjustable Back Stand

   Supports the console on a table for comfortable viewing and gaming.
4. Multi-Area Cooling Vents

   Four ventilation zones for effective heat dissipation.
5. Precise Cutouts

   Reserved charging port and side openings for easy charging and console removal.
6. Accessories

   Includes a 1.5m USB to Type‑C charging cable.
7. Keylinker APP Support

   Connect via Bluetooth (device name: JC500) to remap buttons, adjust joystick dead zone, vibration, and update firmware.
8. Ergonomic Comfort Grip

   Large, full-hand grip design reduces fatigue during long handheld sessions.
9. Protective Case Function

   Wraps the console for daily scratch and drop protection.
10. Note

    This controller does NOT support NFC functionality.

Q ： Can I charge my Switch 2 while using this controller?

A ：Yes! The bottom charging port is accessible, so you can charge your Switch 2 while playing.

Q ：Does it have NFC for Amiibo? Does this work with Switch 1?

A ：No, this controller does not support NFC/Amiibo functionality. No, the JC500 is designed specifically for the Nintendo Switch 2.

Q ： is it dockable with the Switch 2 dock?

A ：No, you need to remove the controller to dock your Switch 2.

Q ：Why won't my Switch 2 wake up when I press the HOME button?

A ：The "wake" function must be manually activated. Please follow the setup guide for activation.

Q ：Can I use it as a standalone wireless controller?

A ：Yes, it connects via Bluetooth and can be used separately from the grip, similar to a Pro Controller.